DNA and Genetics
Acid and base
Definition
pH
Indicator
Titration
Titration is mostly used when you have an acid and a base.
Area of Shapes
Area
Imagine you get a pencil, can you fill a shape with it by only using dots? You definitely can! That is the basic concept of area: it is how many dots you can fit into a shape. So the area of a shape is just a way numerical way for people to express how big it is.
So let’s start with a square. How do we quickly count the number of dots in in our shape? We can use multiplication: we count the number of dots per line and then how many lines there are. However, “numerical” means it must be consistence. Therefore, mathematicians use the side lengths of the square as the basis for area, which gives it the general unit of $\text{length}\cdot\text{length}$.
Area of basic shapes
As you can probably observe, it is quite easy to find the the area when the shape’s two sides are perpendicular with each other. It is also especially easier for the square, where both sides are equal to each other. Because of that, the area of the square from is:
Rectangles is the basic shape for us to later construct the formula for the area of other shapes. Let the length be $l$ and height be $h$ (they can be any sides as long as they are two different sides), we have the the area of the rectangle:
Triangle is just half of the area of the rectangle that can fully cover it. The real struggle with finding the area o
Combining both the rectangle and the triangle, we have the area for the
Spliting and combining area
Atom, Compound, and Matter
Bhor model
Atom
Elements
Compound
Matter
Pure substance
Mixture
Homogenous
Heterogenous
Phase
Cellular Respiration and Photosynthesis
Central unit of energy
Cellular respiration
Photosynthesis
Conversion Factor
Conversion
Checking with conversion factor
Dimensional analysis
Work and Energy
The general idea of energy
The unit of energy is 1 Joule (abbriviated as J) equals to $1kg\cdot m^2 \cdot s^{-2}$
There are a few energy types:
- Kinetic energy
- Potential energy
- Thermal energy
- Chemical energy
- Mass energy
And we have not accounted for all of the energy! Scientists have drawn a concept of dark energy, which they acredited it to the expansion of universe.
When we consider of energy, we think of a system. A system is a “boundary” of the energy. In simpler words, a system is just the particular object that you are concerning. To the change of the total energy of the system, we will will need to either send energy to the system from the environment. All of that can be summarized to the first law of the thermodynamic:
In that equation, the external work done from the environment to the system $W_{ext} add with the introduced heart $Q$ will change the total energy of the system $\Delta E_{sys}$. When doing that equation, you can simply consider
Work
Energy is a “cheatcode” for us to skip considering all of the forces; however, we can still make a connection between force and energy. So if a constant force moves an object, we can then deduct the work it has done with:
If the force is non-constant, you can “chop” the path into tiny sections and add the work together with integration:
In a basic level, the work from kinetic friction can be approximate as
Kinetic energy
For now, we shall define kinetic energy with the variable $K$ and there are a two possible source of energy
Translational kinetic energy
Rotational kinetic energy
Potential energy
The most common potential energy you will encounter is gravitational potential energy, which depends on the mass $m$ and how high is the mass from a reference point $h$.
There is also potential energy from compressing a string, which is:
Work-energy method
As discussed above, it is a great shortcut,
We should use this method if there is a change of height or speed over time.
We first identify the system, then identify how the environment is adding energy to the system. One important thing to realize is that the potential energy is not an external work, but rather a part of a system. You should try to get the biggest system possible.
Note that one of the amazing part of this system is to do not consider the path, but only the start position and the end position. We do not concern about what happen in-between of the motion. If you have the time elapsed $\Delta T$ during the motion, you can also calculate the power of the system:
Environment and Nutritional Modes
Abiotic component
Physical condition is what each component give.
Nutritional modes
There are four main modes (use table).
Relationship between creatures
Mutualistic relationships and parasitic
Nutrition cycle
The food chain is simply a way for nutrition to cycle
Equilibrium
Reaction direction
So far, we have been discussing about one-way reaction: if you put two chemicals together, they react with each other to form a product.
Reaction rate
Equilibrium constant
Fungi
Characteristics
Fungi are chemoheterotroph. They are mostly multicellular except yeast, which decided to be the cool kid that breaks the rule and become unicellular. One unique characteristic of fungi is that they have cell walls that are made of chitin
One special thing about fungi is that they form branches that are called hyphae beneath the surface. This is why you cannot just “remove” food mold by scooping the top, because there is probably a whole network bellow the surface. The hyphae’s function is similar to a plant’s root: to penetrate bellow the surface and get nutrients. Some fungi also have hyphae specifically to feed on living animals, either by clinging on the skin or inserting itself to the skin cells to suck the nutrients.
When we talk about a fungus, we would usually think about a mushroom. In fact, a mushroom is a spore-producing structure above the ground, and fungi reproduce by sending spore (a single-cell reproductive structure) to other places.
Role
Isotope
Isotope
Notation
Decay
Rotational Kinematics
Angular kinematics
Angular acceleration is not radial acceleration.
Tangential values
Collisions and Momentum
Atomic idea
Objects are made tiny atoms and their interaction are “spring-y”. When two objects come close together, they do not want to come very close to each other, so the tiny atoms push against each other.
Therefore, we look at momentum:
And then we define another separate quantity for calculate the impulse, which is simply the change in momentum:
But another definition of impulse is the the addition of tiny small forces that made when the spring tried to push two objects:
And if you know a little bit if calculus (which, you are not required in this chapter), you can see that the impulse is the area under a curve.
Average force
So to calculate the average force, we can use the impulse and time:
Collision
You might notice this thing: if you drop a glass, would you preffer dropping it to a soft carpet floor or to a hard concrete floor?
Conservation of momentum
So we have been mostly look at colision between something small and something large, but momentum is most powerful when there are two relatively equal objects collide with each other.
The equation is:
There are two types of collisions:
- Inelastic collision: happends when two objects stick into each other
- Elastic collision: happens when two objects bounce against each other.
In inelastic collisions, energy is not conserved. This is because the two objects must be deformed in order to make the two stick together.
Elastic collision is where energy is conserved.
You mnust also use
Angular momentum
Three cases of angular momentum: Ln= bmv = R^2m\omega = I \omwga
Partial Fraction
Splitting fraction
The first step you need to do is factoring the numerator.
Now, there are two ways for you to split the fraction, depending on what you have. We will need to go through each factor and consider the highest power: if it is a degree one or two.
Note that we always consider what is inside the bracket, and the exponent outside the bracket will tell us how many times we will need to repeat the partial fraction terms.
Finding the solution
After all of that efforts to split the fraction, we will now combine it again. Here, it is important to remember one important aspect of fraction addition:
Wait what? Why are we combining everything back again? Actually, it is because now, we got a completing new fraction that is equal to the old fraction. More importantly, we can now equate the new numerator to the old numerator.
So the trick here is to find what number adds together will correspond to each other. The rigorous steps are like this:
However, we do not have much time inside the tests room, so we simply pick out all of the coefficients with the degree zero, degree one, and degree two, and so on from each side, and then equate them together. Now, we will have a system of equation to solve.
Plant structure
Special cellular structure
In plants, the cells are a bit different compared to animal cells. The first difference is the existence of cell wall, which can be splitted into two parts:
- primary cell wall: a thin outer layer of cellulose that provides flexible structural support; and
- secondary cell wall: a thick rigid layer of cellulose mixed with lignin that provides rigid structural support.
Because the lignin does not allow water to pass through, the cells need small channels called plasmodesmata to allow cell-to-cell transport. Finally, the cells are also gluded together with a pectin coating called middle lamella outside of the primary cell wall.
It is quite costly to make cytosol fluid, so plant cells “cheat” their way in order to appear bigger by filling water into the central vacuole. That will create the turgor pressure against the cell wall to provide structural support. So when we say a cell is turgid, it is mean that the cell is inflated to the point it can fill the entire space within the cell wall, while flaccid will mean the opposite.
Plant tissue
Generally, a tissue means a group of cells that serve a similar purposes. In plants, biologists group the cells into three main tissues from outer-most layer into the centre of the plant as: dermal tissue, ground tissue, and vascular tissue.
Dermal tissue
A “dermatologist” is a doctor that can treat your skin, so a dermal tissue is essentially the “skin” of a plant. Our journey starts with the epidermal tissue that forms the outer-most layer of plants, where waxy cuticle are being produced (just imagine it like your sweat). Then we have the guard cell which forms the lips of the stomata to control the intake of air and the loss of fluid from plant.
Ground tissue
The cells here are given some really cool names that are not so cool to remember before your tests. Parenchyma is a living cell that conduct most of the metabolism function. Essentially, you want to put the “factory” near the “resource”, so this cell is usually located in the leaf. We then have collenchyma that provide flexible support in growing plat structure. Lastly, we have sclerenchyma cells that are dead at maturity. This is because their secondary cell walls have gotten too think to allow water to pass through; but also because of that, they act as a rigid structural support.
Vascular tissue
This is the system that allows plants to transport resources across their body. There are two different “highways routes” in plants:
- xylem, which is responsible for the transportation of water up the plant; and
- phloem, which is responsible to move sugar across the plant.
Xylem is a system that mostly comprised of dead cells. Here, there are two “types” of highways:
- Trachieds: These vertically long cells are hollow in the middle with thick secondary cell wall on the outside. There are pits on the side between the cells to enable water to “climb” through the cell-stairs if it wants to go up.
- Transport vessles: These cells are shorter than trachieds but they have perforation plates at the top and bottom of the cells. This allows water to just go straight to the top like an elevator.
Phloem has cells that are alive but are specialized in their function, so they are a bit different. There is also two different types of cells:
- Sieve tube elements: These cells are alive at maturity, but they have no nucleus, ribosomes, or vacuoles. Just like transport vessles, they are arrached end-to-end with sieve plates between the cells.
- Companion cells: These cells are connected to the sieve tube elements through plasmodesmata to keep them alive. Their purpose is to maintain the highway for transporting sugar.
Meristem
Plants have regions of cells called meristems. These are areas where cells are divided at a much higher rate and the cells can become any cell type. So the apical meristems are located in the root or the shoot to help plants grow faster. You can imagine why expanding vertically is important for a plant: being higher will help the plant reaches more sunlight, while having a longer root will help the plant reaches more water and nutrients.
Plant systems and growth
So plants are splitted into two parts:
- Root: This is the part underground that are responsible for the taking up water and nutrient. It also have the obvious function of anchoring the plant.
- Shoot: This is the part above the ground which can capture light for photosynthesis. It is also where sexual reproduction happens.
So now you can combine the concepts to describe the growth of a plant. The primary growth is the vertical growth of a plant, which is facilitated by the primary xylem and primary phloem. The xylem and phloem are arranged as little “columns” in a ring. Meanwhile, the secondary growth describes the growing in the radius of a plant. This is made by the growth of the secondary xylem and secondary phloem, which are arranged like a continuous ring. In any cases, the xylems are closer to the centre than the phloems and over time, the compressed layers of secondary xylem will become wood.
Polynomial Division
Long division
Synthetic division
Ignore the x
More than one variabe
Polynomial
Quadratic equation
Different ways of expressing the same equation
Polynomial
Notable formula: x-intercept
Projectile motion
Two independent axes
The connecting variable is $t$: with time, you can connect the two axes. It is because the change in time is the same in both axes.
Symmetry
Protein Synthesis
Protist
Protist
What are protists? They are usually defined by what they are not: protists are eukaryotes that are not plants, animals, or fungi. Funny enough, they are classified by their similarities to those groups. They are mostly unicellular and tiny, but they are the one that made up most of Eukarya domain’s diversity.
Plant-like protist are similar to plants because they are photoautotroph. They use sunlight as their main energy source and can make organic compound by themselves. Their cell walls are made of cellulose and they are the base of the food chain.
Animal-like protist are chemoheterotroph and they feed by eating other organisms. In fact, many protists here are motile predator which means that they can move to hunt their victims. In terms of structure, they do not have cell walls and are unicellular.
Fungus-like protist here are also chemoheterotrph and they feed by releasing enzymes to “absorb” other organisms. That obviously makes them also decomposers. They can be unicellular or colonial, and they are similar to fungi with their chitin cell wall.
In terms of production, most protists produce asexually, but some can also produce sexually. Some protists can move using flagella or cilia, others might just flow along with the flow of life passively. As you can probably tell from the way the Author writes this chapter, protists are very diverse and it is hard for scientists to generalize them. In fact, the interactions between some protists and other eukaryotes are still under investigate.
Eukarya supergroups
Excavata
SAR
Archaeplastida
You can also find land plants in this supergroup, showing how close algae can be to plants.
Uniknta
Unresolved
Because protists are so diverse, scientists still have difficulties classifying them. When writing this chapter, the Author also encountered a problem between writing only the general points (which makes it way too short) or writing about each species of protist (which makes the chapter too long). That is why we have this special unresolved group.
Quadratic equation
Other notable forms
You already have the standard form
Parabola
Solving quadratic equation
Solve by factoring
Solve by completing the square
Solve by quadratic formula
The discriminate can also tell you now many solutions there are.
Reaction Rate and Reaction Mechanism
Reaction rate
Series
Series
A series is simply adding the terms in a sequence together:
Usually, the context implies that a series is an infinite series, while if you end at one particular index, it is called a partial sum.
There are a few possible manipulation you can do on a series, which are just extensions of the basic algebra addition rules: // taking constant outside // split two terms
A special type of series is called geometric series, which is defined as: // textbook definition of series
Note that to quickly check if a series is a geometric series, you simply divide a term by a previous term, then do the same with a different term. If both of them are equal to the same constant, they are a geometric series. // fraction rule
A telescopic series is a series with one possible form of: // telescopic definition 1/(n(n+1))
It is poetically called like that is because the series allows you to see the from the beginning to to the end, like a telescope bringing images from very far away close to your eyes.
The harmonic series is // sumation definition
The p-series is a series with the numerator 1 and the numerator is the index raised by some exponent: //definition
Convergent and divergent
In the study of infinite series, we (to be precise, mathematicians) wants to consider whether a series converges or diverges. A series diverges when, even if you add an infinite number of terms, it still approaches a number… hang on, isn’t that very similar to the usage of limit?
The general idea to test for divergent is if the limit of a general term approaches to infinity but the result do not exist or not equal to zero, then the series diverges // if lim DNE or not equal to 0, series is diverge
If we found the limit =0, however, we know nothing about the series and we will need to proceed with other tests.
The integral test uses the basic fact that an integral is just a sum of many small parts together. Therefore, if the integral converges, the sum also converges, and vice versa: // integral test
In this test, just pick whatever lower limit that is an integer that is convenient for you. There is also a restriction on the function itself: it must be decreasing, or in terms of derivative: // dy/dx
Therefore, chose your lower bound of the integral wisely to ensure that you can satisfy the requirements
And going back to the rules of addition: if one of the series diverges, then if we add another series, it will still diverges
Geometric series test is used when you have… a geometric series.
Sum of series
We can only find the sum of a series if it is convergent.
The geometric series has the sum of
This is one of the most beautiful aspect of the telescope series: its always converges to 1! To derive this fact, you must use partial fraction, but the result you should get is: // mathematical definition
The harmonic series always diverges
The p-series converges if p > 1
Taxonomy
Taxonomy
There are a lot of spiecies in our planet, but it is unfortunate that we have not able to study them all. Most organisms are small and easily overlooked, while others live in hard to access locations. Sometimes, diffrent species look alike. Therefore, we need a system for naming and classifying organisms so that we can document them, and some of the most widely adopted system is the Linnaean taxonomy system. This will ensure that scientists from everywhere in the world can communicate about the spieces they are researching.
The taxonomic hierarchy starts at the species level and organize them into larger groups based on morphological traits. That means that scpieces in the same group will have similar physical characteristics. So from the largest to the smallest, we have:
- Domain → most inclusive
- Kingdom
- Phylum
- Class
- Order
- Family
- Genus
- Species → least inclusive.
So to refer to a member of any level of the hierarchy, we use the word taxon (plural taxa). As for the basic, the three dmomain of life are Bacteria, Archaea, and Eukarya.
Of course, it is impossible for us to say the entire hierarchy every time refer to a species. Therefore, we use Bionomial Nomenclature, which is a two-part format for assigning scientific names to species. In this format, we simply refer to a species with its genus and species class. So human will be referred to as Homo sapiens.
Phylogeny
When we talk about similarities between two spiecies, we mostly use morphological similarities. This means that the similarities are based on shapes and forms. This means that there are physical similarities between two spiecies, such as the same number of bones or skin characteristics. Usuaully, having the same traits would mean having the same DNA, which is called molecular similarities.
Biologists wanted to go a step further and categorize how a similarity arise, so they call the similarities between two species due to shared ancestry “homologies”. Sometimes, there are also similar traits that occur because the environment force two different species to develop the same characteristics, which are called analogies.
Phylogenetic tree
A phylogenetic tree shows us the hypothesized timeline between the taxa and when they stopped being similar to teach other. In a tree:
- the branch tips represent the species that are currently exist;
- the nodes represent the points where an acestor split to form new taxa; and
- the root shows the common ancestor of all the taxa in the tree.
To determine how “close” two taxa are, you simply consider “what is the most recent common ancestor between them?” When when you follow the path between them, just find the lowest point in the graph and remember that: you cannot walk on the same path twice.
When there is a branching happening, the taxa will share some traits that are similar to the ancestor, which is called shared ancestral traits. However, there will be also a unique difference give us the reason to classify that species as a different unit; that difference is what we called as a “shared derived trait”.
Natural and artificial systematics
You see… the problem with classifying nature is that nature does not follow any classification system. Moreover, we are simply construct the relationships between each spieces based on our knowledge and technology, which have a lot of room for improvement.
Laws of Thermodynamics
Zeroth
First
Second
Third
Volume of Shapes
Standing wave
Wave
Describing a wave
At a basic level, the trigonometric function sine is the foundation of all waves. If we take a “snapshot” of a wave at a specific time, we may get the following figure:
What being left out of the figure above is the fact that a wave moves, or wave propagates. The speed that a crest will move is called wave velocity; it is a characteristic determined by the medium in which the wave is moving. For example, sound travels through air at approximately 340 m/s, which means that if a thunder strikes (creates a crest), then a person standing 340 meters away will hear it after a second.
The next quantity that you will see very frequently is frequency $f$. This tells you how many events (in this case, a wave) happen in a second, with the SI unit is Hz. The reciprocal of this is period $T$, which tells you how often an event happen:
Another way to phrase period is: how many seconds before an event repeats.
Note that there is also a graph similar to , but with the x axis being labled as time. That graph will tell you the height of a point on the wave over time, which is useful to tell you the frequency of that wave (since it shows you the time between twi consecutive crests).
Notice that since we have the wavelength describing (in meters) how far apart the crests are, while period is telling us how much we need to wait for the next crest (in seconds), we can find the propagation speed by dividing them. Therefore, we have the universal wave equation:
If you think about this equation with frequency: because we are seeing the waves $f$ times per second, so if we multiply it by $λ$, that means the first crest has traveled that much distance after a second.
The most basic wave you will see is a transverse wave, which means the crests “move”, but the particles of the medium still stand in the same horizontal position — it only move up and down. You can imagine this like holding an end of a rope and swing it to create waves. As a part of the medium, your hand only move up and down to give the waves energy.
Another frequently seen wave is longitudinal wave: the particles in this waves will move back and forth along the direction of the wave. This is how soundwaves work.
Interference
Wave phenomenons
Diffraction
When waves enter a hole, the sides of the wave will be slowed down by the walls, making the waves spread out after exiting the hole. Similarly, when a wave travel through an object, a similar thing happen to curve the wave.
A wave with a longer wavelength will have less momentum per crest, making it bends more than waves with shorter wavelengths.